Plugs for slatwalls

Nov 5, 2016

Pluggen slatwalls

These plugs / spacers are made in addition to the existing range of accessories for the slatted walls that parties such as retif.nl sell.

lamellenwand



For hanging wooden objects there were no suitable plugs for sale so they were made by ourselves (in transparent, white and black). Above you can see: the counter moulds, the moulds and the end result (unfortunately not crystal clear but matte). They fit perfectly in the profile of the slatted walls. UPDATE: all plugs are made with a 3d printer.

7plugs


7 plugs ids:

==============

3d printed on layer height: 0.20, 40% fill density

|--------- 7 plugs identifier (this digit is always 7 for 7 plugs)
||-------- wall type (wall type 1: slatwalls, wall type 2: direct connection to walls, -)
|||------- plugtype (Block, Pinblock (smaller hole than with screwhole))
||||------ Y = color (Transparent, White, Silver, Black)
|||||----- Closed/Open/-
||||||---- parttype (Front/Back/Support/Pincurve)
|||||||--- Small/Large
||||||||-- Low/High
====================================================

all ids:

71BYCFSL
71BYCFSH
71BYCFLL
71BYCFLH
71BYCSSL
71BYCSSH
71BYCSLL
71BYCSLH

71BYOFSL
71BYOFSH
71BYOFLL
71BYOFLH
71BYOSSL
71BYOSSH
71BYOSLL
71BYOSLH

72BYCFSL
72BYCFLL
72-YOBS
72-YOBL
72BYCSSH
72BYCSLH

72BYOFSL
72BYOFLL
72BYOSSH
72BYOSLH

71PYOFLH
7-PY-PSL

plug2   plug3   afstandhouders   001

Categories